Automatic saturator of the CAM OMRON M. brand (2 columns)

Brief description of the operation of the Saturator automatic brand SAM-OMRON M (two columns) Turn on the automatic power supply. Open the water tap to the pump on the saturator. Loosen the bolt (or nut, depending on configuration) located at the top of the pump. This is necessary to bleed air from the pump. As soon as the water goes, tighten the bolt all the way. Feed the pressure of carbon dioxide (CO2) into the saturation column, set the pressure from 3 At to 4 At, depending on the type of filling. Monitor the pressure on the pressure gauge. Turn the switch to the / AUTO / mode. During the initial start-up and the first filling of the columns, it is necessary to control the working pressure in the columns, if necessary, relieving it. After the water in the saturation column reaches the upper level sensor, the saturator will enter automatic operation mode. Open tap No. 8 to dispense a drink to the filling machine. In order to avoid water hammer and unstable operation of the device, the crane must be opened smoothly. Crane No. 2 serves to increase or decrease the supply of CO2 to the saturation ejector. The quality control of the drink is carried out by the laboratory necessary laboratory equipment for this study. The selection of a drink for research should be carried out through a filling machine, or through a device specially designed for this.